VIKTEC 14pc Bearing And Gear Puller Splitter Separator Set  VT01001

.Removes gears, pulleys, and steering wheels.
.Drop forged, heat treated steel attachments.
.Heat treated precision machined steel bolts.
.Black oxide finished and chrome plated for durability.
.Removes gears, pulleys and steering wheels.
.Separates

---

VIKTEC 7pc Steering Wheel Puller Set VT01002

.Two-leg puller, with two pairs of legs and two thrust caps.
.For use on Ford and Vauxhall/Opel vehicles.
.Contents: Yoke, Thrust Bolt, 87mm Leg * 2pc, 135mm Leg * 2pc, Thrust Cap * 2
.Minimum/Maximum Spread: 38/85mm

---

VIKTEC 12pc Double Mechanical Bearing Separator and Puller Set VT01003

.Mechanical puller set with ?30-50mm and ?50-75mm separators and single yoke with 180mm thrust bolt.
.Suitable for engineering, automotive, marine and agricultural applications.
.Supplied in blow mould case.
.Contents: Separators; Ø30-50mm, Ø50-75mm, Thrust bolt 180mm, Extension bars; 4 * 130, 4 * 105mm,  Cross beam 160mm.
.Separator size: Ø30-50mm, Ø50-75mm.
.Maximum reach: 170mm, 220mm.

---

VIKTEC 5pcs Blind Bearing Puller Set VT01004

.Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts.
.Fully chromed carbon steel medium stroke slide hammer.
.377mm overall length with 1.4kg hammer.
.Bearing extractor collets with internal capacity from 11 to 32mm. 
.Colet sizes: 11-16mm (3/8 -1/2 ), 15-19mm (9/16 -11/16 ), 18-25mm (5/8 -1 ), 26-32mm (1 -1-1/4 ).
.Supplied in blow moulded case.

---

VIKTEC 13pc 10lbs Dent Puller Slide Hammer Set VT01005A

.Designed to remove dents for auto body repairs without removing the inside panel and upholstery.
.The long shaft allows for a more powerful pulling force.
.The slide hammer is made from malleable steel with a 10lbs sliding weight
.Comes with knurled handle

---

VIKTEC 13pc 10lb Dent Puller Slide Hammer Set VT01005B

.High quality tool for heavier applications.
.Heavy hammer makes shifting tough things easy.
The 10lbs slide hammer and the variety of tapered attachments easily pulls dented or creased sheet metal back into place.
.Solid steel shaft with knurled handle

---

VIKTEC 13pc Slide Hammer and Puller Set VT01006A

.2.5kg Slide hammer with 570mm shaft. 
.Use eight ways: external 3-Jaw puller, internal 3-Jaw puller, external 2-Jaw puller, internal 2-Jaw puller, grip wrench adapter, lip puller, dent puller. 
.Supplied in blow mould case.

---

VIKTEC 14pc Slide Hammer and Puller Set VT01006B

.2.5kg slide hammer with 570mm shaft.
.Use eight ways: external three-jaw puller, internal three-jaw puller, external two-jaw puller, internal two-jaw puller, grip wrench adapter, lip puller, hub puller, dent puller.
.Supplied in blow mould case.

---

VIKTEC 15pc Slide Hammer and Puller Set VT01006C

.2.5kg Slide hammer with 570mm shaft.
.Use eight ways: external three-jaw puller, internal three-jaw puller, external two-jaw puller, internal two-jaw puller, grip wrench adaptor, lip puller, hub puller, dent puller.
.Supplied in carry-case.