VIKTEC 6.5L Pneumatic and Manual Oil Extractor Pump VT17315B

pneumatic waste oil extractor
VIKTEC 6.5L Pneumatic and Manual Oil Extractor Pump VT17315B
VT17315B
Main Tube:
diameter: 0.31" * 0.39"
length: 39.3"
Extension Tube+Wire:
diameter: 0.16" * 0.24"
length: 47.2"
Extension Tube:
diameter: 0.21" * 0.26"
length: 47.2"
Quantity
Safety Precaution:
To make the extraction job smooth and easy, evacuate the oil while it is warm. Working temperature between 35°F-175°F (2-80 ºC).
Before extraction, make sure the tubes are connected tightly.
In order to maintain the consistent vacuum pressure, please close the air inlet valve while operating in manual mode.
DO NOT extract oil over the Limited Line on the oil extractor to prevent overflow. If the fluid goes over the Limited Line, it might flow into the vacuum chamber and cause leaking. The fluid should not exceed the limit line either while pouring.
 
Features:
Hassle-Free ➤ Change oil without crawling under your car. No mess, no cleanup. Simply remove the dipstick and insert the tube for a seamless oil change experience.
Simple & Secure ➤ Change oil easily anytime, anywhere with just a few pumps, no additional equipment needed. Transport worry-free with the attached sealing cap to prevent spills.
Effortless Access ➤ Get every drop of oil with upgraded vacuum oil changer and its extra-long tubes. Simply slide it to the very bottom of your reservoir, ensuring complete suction.
Versatile Fit ➤ Extract a wide range of fluids effortlessly. With both pneumatic and manual modes for various applications. Perfect for cars, motorcycles, boats, and more. *Note: Not suitable for gasoline or volatile/corrosive fluids.
 
Related Tools: