VIKTEC 51PC Bearing and Seal Driver Set
VT01509
NINGBO
.Suitable for mounting of bearings, bushings, sealing rings, and rubber (even for use with the hydraulic press.)
.Impact-resistance allows use with a hammer, all 50 pieces are interchangeable with each other.
.Impact-resistance allows use with a hammer, all 50 pieces are interchangeable with each other.
Quantity
Product Feature:
.Suitable for mounting of bearings, bushings, sealing rings, and rubber (even for use with hydraulic press.)
.Impact-resistance allows use with a hammer, all 50 pieces are interchangeable with each other.
.Kit includes:
Steel drivers with a 12 mm shaft, Size: Ø 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 74 mm
.Metal Punch 220 mm for use with a hammer
.Quick Connect Shaft
.Allen Screw Key
How To Use This Tool:
1st step: Put the screw out from the metal punch or from quick connect shaft(Picture 1).
2nd step: Choose the suitable size of the steel driver and put into the punch(Picture 1).
3rd step: Locked the screw with the screw key(Picture 2).
4th step: Mount the bearing,bushing,sealing rings or rubber with hammer or with hydraulic press.
.Suitable for mounting of bearings, bushings, sealing rings, and rubber (even for use with hydraulic press.)
.Impact-resistance allows use with a hammer, all 50 pieces are interchangeable with each other.
.Kit includes:
Steel drivers with a 12 mm shaft, Size: Ø 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 74 mm
.Metal Punch 220 mm for use with a hammer
.Quick Connect Shaft
.Allen Screw Key
How To Use This Tool:
1st step: Put the screw out from the metal punch or from quick connect shaft(Picture 1).
2nd step: Choose the suitable size of the steel driver and put into the punch(Picture 1).
3rd step: Locked the screw with the screw key(Picture 2).
4th step: Mount the bearing,bushing,sealing rings or rubber with hammer or with hydraulic press.
Related Tools:
