Extractor for injectors.
Suitable for Mercedes CDI engines OM 611, OM 612 and OM 613.

For removing very tight injectors from the cylinder head in diesel engines.

For removing the nozzle head of injectors, for example Bosch, for CDI engines, including Mercedes-Benz OM 611, OM 612 and OM 613, as well as HDI engines.

For removing damaged diesel injectors from cylinder heads.

A support cylinder for removing the injector from the cylinder head, with an inner diameter of 29 mm and a

Ball bearing insert for holding the tension spindle.

With the help of the pull spindle and the support cylinder, the injector can be pulled out of the cylinder head with a high power transmission.

Extractor. 

Box contents:
1 x special socket wrench hexagon socket 10 mm, with bore 7.5 mm diameter, 1/2 inch square drive or 21 mm external hexagonal.

1 x special socket wrench, inner diameter 29.5 mm, ball bearing insert for supporting the threaded rod, via this tension spindle and the support cylinder, the injector can be pulled out with high force.

1 x special socket wrench, external hexagon wrench width 29 mm, length 78 mm, outer diameter 40 mm, side opened, 24 mm wide slot, 1/2 inch square drive.